$24.99
Domestic
Shipping
Orders between $0 and $50
$54.99
Domestic
Shipping
Orders between $50 and $250
$99.99
Domestic
Shipping
Orders between $250 and $1,500
FREE
Domestic
Shipping
Orders between $2,500 and $10,000
Additional restrictions and limitations may apply. Please visit our Terms & Conditions Page for full promotion details!
Click image to enlarge
6 Volt Temperature Sender, Double Post, Flat Head
Part Number: 6V-2942-2 Original Part Number: 10990
USA made Fits original engine, others may need thread adapters.
If 12 volt use 1956 style even in 53-55 or use electronic volt reducer with 6v sender. Never use teflon tape.
Better yet, use new gauge kit
INFO:
Original gauges need original senders our 2940 series.
THREAD MEASURES 5/8" BUT IS CONSIDERED 1/2" PIPE THREAD
12V TEMP COLD 15-20 OHMS, HOT AT 110
GAUGE RESTS (OFF) ON HOT, TURN IGN ON GOES TO COLD
flat-head v8, use one single post & one double post, only available 6v
if flat-head is 12v use electronic volt reducer.
sender is self resetting when cooled to 120.
fits 57-60 and 48-52 also T-birds, fits flat heads, 239-272-292-312 etc. all Y-blocks
Using thread sealant on electrical senders could cause added resistance to ground which will make the gauges read lower than actual. Loctite makes an anti-seize called Graphite 50 that is electrically conductive. If you feel the temperature or oil pressure sender needs to be sealed, Loctite Graphite 50 would be an ideal choice of sealant since it will not add resistance to the sender ground.
Part Instructions
Unless otherwise noted, our parts fit only these applications:
- Electrical
- 12 volt, negative ground
- Bed
- 6½ foot flareside (a.k.a stepside)
- Body Style
- F-100, F1